The leader of vocation criterion | 行业规范的倡导者
   
   
      
 
Y1 series   NYG series   NYW series   G1 series
   
   
 
It is composed of simple modules and elements, constructed around the wall. The dry hanging construction is adopted to envelope the inner wall facilitating the discharge of moisture, breath, temperature preservation of the wall, thus to prolong the life of the wall. The system is an extremely good choice for wall installation and decoration, available for corridors, halls, toilets, elevator blocks, refit of old buildings, underground and other space environment.
  Self-developed dry hanging construction facilitates the discharge of moisture to prolong the life of the wall.
  Flexible combination of design and application of composite materials
  Convenient for adjustment of vertical line and horizontal line
  Powerful function of horizontal hanging
  Functions used on ceiling
  Realizing "Portable Upholster"
System Introduction

Appearance

 Several panel materials are available, which may be used in single and in combination, to break through traditional simple and stiffness, and enrich space contents
Avoid plastering and filling of wet construction, and keep clean and smooth wall surfaces.
The structure is provided with horizontal and vertical adjustment functions to keep the wall surface harmonious with the ceiling and the floor.
 
Structure Construct around the wall, use 44 steel column and joints to install glass brick, thin marble, pottery plate and other new building materials on the surface of buildings' inner walls.
Suspending panel line is 54mm away from the wall.
Suspending column line is 32~58mm away from the wall, in general with the distance of 41mm.
Panel thickness is not more than 13mm.
If the distance between the suspending column line and the wall is more than 58mm, an adjustment piece is needed
There is a corner column at the inside and outside corner of partitions
There is a special joint piece in the suspending partition, which may connect to a wood wall or a system partition.
 
Characteristic Dry hanging construction avoid surface cracking or whitening that occurs during wet construction in an atrocious environment. It is also freezing-resistant, acid-resistant and stain-resistant to guarantee the quality of final construction.
Module assembly, rapid and easy construction.
Dry hanging can reduce the self-weight of the building. Steel columns undergo antirust treatment with strong bearing capacity. The height can be 20000mm.
Ventilation and temperature preservation prolong the life of the wall.
Easy to replace surface materials keep value forever.
Powerful wiring and suspending capacity.
 
Local Function and Characteristic